Request for Quotations for the supply, delivery and installation of equipment for maize flour processing unit on behalf of SOSOMA Industries Ltd: (Deadline 16 March 2021)

Request for Quotations for the supply, delivery and installation of equipment for maize flour processing unit on behalf of SOSOMA Industries Ltd: (Deadline 16 March 2021)

Request for Quotations for the supply, delivery and installation of equipment for maize flour processing unit on behalf of SOSOMA Industries Ltd: (Deadline 16 March 2021)

I. Background and Context

SOSOMA Industries Ltd is a Limited Company established on November 1st, 2008  with a capital of sixty million five hundred thirty thousand Rwandan Francs (FRW 60,530,000) divided into 6,053 shares. SOSOMA Industries Ltd is equipped with the certificate of domestic company registration No: 101767471 and Investor certificate No C/658/2009.

SOSOMA Industries Ltd sells nutritious high-quality products especially to infant, young and elder people including pregnant women, vulnerable people such as people affected by humanitarian crisis, chronic diseases, …

The Vision of SOSOMA Industries Ltd is to be a leader in provision of safe, quality nutritious foods towards elimination of malnutrition in the region. This will be achieved through its missions of producing and supplying safe, high quality, and value-added nutritious foods that focus on customer needs.

Now SOSOMA Industries Ltd is implementing an Integrated Development Project entitled: “Ensuring food and job security during the COVID-19 pandemic in Rwanda by creating jobs and increasing community income through enhancement of the maize supply chain and flour processing” in partnership with GIZ.

In this regard, SOSOMA Industries Ltd hereby solicits quotations from qualified suppliers to tender for this solicitation.

Prospect offerors are responsible for ensuring that their offers are received by SOSOMA Industries Ltd in accordance with the instructions and guidance, terms, and conditions described in this RFQ. Failure to adhere with instructions described in this RFQ may lead to disqualification of an offer from consideration.

 II. Offer Deadline and Protocol

Offers must be received not later than 5:00 pm local Kigali time on 16th March 2021 in a well-sealed envelope with the following mention: Quotations to supply, deliver and install equipment for maize flour processing unit on behalf of SOSOMA Industries Ltd, do not open except in public, or by e-mail to sosoma@sosoma.rw

 III. Questions

Questions regarding the technical or administrative requirements of this RFQ may be submitted no later than 4:00 pm local Kigali time on 15th March 2021 by email to: sosoma@sosoma.rw . Questions must be submitted in writing; phone calls will not be accepted. Questions and requests for clarifications – and the responses thereto – that SOSOMA Industries Ltd believes may be of interest to other Tenderers will be circulated to all RFQ recipients who have indicated an interest in bidding.

Only the written answers issued by SOSOMA Industries Ltd will be considered official and carry weight in the RFQ process and subsequent evaluation. Any verbal information received from employees of SOSOMA Industries Ltd or any other entity should not be considered as an official response to any questions regarding this RFQ.

 IV.  Specifications

 Exhibit A, B, and C contain the technical specifications of the required items. All items offered in response to this RFQ must be new and unused. Please note that, unless otherwise indicated, stated brand names or models are compulsory. An equivalent substitute is not acceptable.  Each lot is indivisible and bids are done for maximum 2 lots.

 V. Quotations

 Quotations in response to this RFQ must be priced on a fixed-price, all-inclusive basis including delivery and all other costs. Pricing must be presented in Rwandan Francs (RWF). Offers must remain valid for not less than ninety (90) calendar days after the offer deadline. Bidders are requested to provide quotations on official letterhead or format.

VI. Delivery

 The delivery location for the items described in this RFQ is at the SOSOMA Industries Ltd  Maize plant location at Kanzenze- Bugesera. As part of its response to this RFQ, each supply is expected to provide an estimate (in calendar days) of the delivery timeframe (after receipt of order). The delivery estimate presented in an offer in response to these ToRs must be upheld in the performance of any resulting contract.

 VII. Warranty

 Warranty service and repair within cooperating arrangement is required for all items under this RFQ. The warranty coverage must be valid on all items for a minimum of six (6) months after delivery and acceptance of the items unless otherwise specified in the contract.

VIII. Taxes

 SOSOMA Industries Ltd is exempt from being charged, customs duty or fee, excise tax, road tax, or any other form of tax or tariff for goods and services purchased for donor funded activities, and therefore, offers must indicate detailed price for relevant taxes if applicable.

 IX. Eligibility

 Any bidder interested to apply for this tender has to fulfill the following conditions:

  1. Being a legally registered Company or Society authorized to operate in Rwanda with specializations to supply maize equipment,
  2. Having the proven experience by 3 recent certificates of good completion,
  3. The bidder must use EBM (Electronic Billing Machine) for all invoices to be paid,
  4. The bidder must provide recent certificates of no litigation with RRA,

X. Opening for administrative documents and financial proposals

 The well-sealed administrative documents and financial proposals received on time will be opened in the presence of the bidders/representatives on Tuesday   16th March 2021 (Kigali Time) at the headquarters of SOSOMA Industries Ltd located in Kicukiro District-Niboye sector.

 XI.  Evaluation and Award

 The award will be made to a responsible bidder whose offer follows the RFQ instructions, meets eligibility requirements, and is judged to be the best value based on a lowest-price, technically- acceptable basis. Please note that there are significant deficiencies regarding responsiveness to the requirements of this RFQ, an offer may be deemed “non-responsive” and thereby disqualified from consideration, SOSOMA Industries Ltd reserve the right to waive immaterial deficiencies at its discretion.

 XII.  Cost of Bidding

 The Bidders shall bear all costs associated with the preparation and submission of their tenders, and SOSOMA Industries Ltd, will in no case be responsible or liable for those costs, regardless of the conduct or outcome of the tendering process

 XIII.  Expertise

  • 3 references and/or certificates of good completion;
  • Proposals: good presentation accompanied by signed letter of intent;
  • Registration certificate from Rwanda Development Board (RDB);
  • Valid Tax Clearance Certificate;
  • Presentation of proof of the possession of EBM
  • The proposal should:
    • have two sections: technical and financial/quotation
    • establish an understanding of the assignment

The Bidder is expected to examine all instructions, forms, terms, and specifications in the tender documents. Failure to furnish all information required by the tender documents or to submit a tender not substantially responsive to the tender documents in every respect will be at the bidders’ risk and may result in the rejection of its tender.

 XIV.  Effect of Termination

 Upon the effective date of termination of this tender, all legal obligations, rights, and duties arising out of this tender shall terminate except for such legal obligations, rights, and duties as shall have accrued prior to the effective date of termination and except as otherwise expressly provided in the tender.

EXHIBIT A-Lot 1: Mobile Batch Grain Dryer Model 

Item No.

Description

QTY

U.P

TOTAL

2 H

MOBILE BATCH GRAIN  DRYER MODEL CPT 10/77 T CAPACITY: 13,4m3 WIDTH: 2,28m LENGTH IN TRANSPORT: 5,50m LENGTH IN WORK: 7,30m HEIGHT IN TRANSPORT: 4,38m HEIGHT IN WORK:

5,07m WEIGHT: ca. 2900kg Please refer to attached product sheet for detailed dimensions.

POWER DRIVE: DUAL DRIVE (PTO & 1 EL. M.)

The dryer can work with electrical power supply only (22kW at 400V, 50Hz) or, if not available, connected to a tractor PTO (capable of delivering 25kW at 540 PTO rpm).

The dryer mounts one electrical motor that, if necessary, can run all the functions that the tractor PTO usually does. The control panel is equipped with:

§  One switch protected by key that allows selecting if to work with PTO or electricity

§  A timer allowing to automatically switch off the electrical motor as soon as the cooling phase has ended.

A 1

HEATING SYSTEM: DIRECT HEATING

– DIESEL

The dryer is delivered with direct heating system mounting Riello diesel burner. With this system, the products of the combustion are mixed with large amount of air coming from the main fan, and the resulting hot air is blown through the grains for drying. Remember to specify the type of grains that will be dried at the moment of ordering so that the burner can be properly calibrated in factory. Fuel tank with 250 l capacity included (if not else specified).

STANDARD LARGE LOADING HOPPER

The dryer is filled through a loading hopper with wide dimensions opening (2,0m x 0,7m) for ease of loading though a pay loader or from a trailer.

DOUBLE DISCHARGE THROUGH THE SCREEN

Manual discharge on the left or right side of the dryer. The discharge is through the screen for reducing the total height of the dryer and the height of fall of the grains.

HOT DEEP GALVANIZED MAIN STEEL PARTS

All welded components that are in direct contact with wet grain or moisture are deeply hot galvanized for ensuring long life surface

resistance to moisture and local fermentation of organic by-products of the drying process. See for example the loading hopper, the vertical piles, bottom loading pipe.

STAINLESS STEEL SCREENS

All the screens of the dryer, (both the external cylinder and the plenum chamber) are made of stainless steel type AISI 430. The surface is smooth in order to have gentle flow of the grains.

FLAT HEAD SCREW WITH GEOMET-B TREATMENT

Fixing nuts with are surface treated with geomet B treatment, and the head of the screws is flat round facilitate the sliding of the grains.

ALUMINIUM LADDER

Supplied with the dryer, for ease of inspections, it can be easily moved all around the dryer.

CENTRALIZED GREASING SYSTEM

By recognizing that a correct lubrication is the main key for long life operations, all greasing points are centralized and accessible from the ground.

REINFORCED CENTRAL AUGER WITH VARIABLE PITCH

The central augers have variable pitch allowing drying at any moisture level (i.e. 38% moisture). The edges of the spiral are reinforced with strong powder coating (of the same type as for reinforcing the tip of payloader buckets) for ensuring extended strength and life in the areas subjected to more wear. Double edge reinforcement at the top and bottom end.

GRAIN SAMPLER

For testing  the  moisture  level  of  the  grain during drying operations.

LARGE GEAR WITH CHAIN TRANSMISSION

The mixer inside the dryer contributes to more homogeneous drying process and it is moved through a chain transmission working on a large diameter gear. The large ratio of the transmission gives high load transfer contributing to dry safely grains at high moisture level.

260 L DIESEL FUEL TANK MADE OF STEEL

The diesel tank is equipped with external level indicator and the capacity of 260l allows long time working before refilling. The tank is manufactured with 3mm steel plates with local reinforcements.

REINFORCED INNER CHAMBER

By  recognizing  that the plenum  chamber is taking the load of the grains inside the dryer, all plenum chambers are manufactured with heavy duty frame and reinforced beams.

DUST GRAVITY CLEANER

A gravity cleaner connected to the main auger allows to extraction dust particle during the drying process for cleaning while drying. 2 sets of spare grids are provided for cleaning particles of different sizes.

TIRES

For towing the dryer within private areas.

FRAME LEVEL BUBBLES

2 bi-directional level bubbles are mounted on the frame for levelling the machine before operations.

ELECTRICAL GENERATOR

An electrical generator is mounted inside the heat generator for powering the electrical functions of the dryer that otherwise would require external power supply.

CONTROL PANEL

Electromechanical control panel for burner and dryer control. The control panel is equipped with a key selector that allows changing and locking the operating mode (either PTO or electrical supply). The control panel has also a timer that allows switching off the electric motor after the cooling phase has ended. The burner automatic stops when the grain reaches the programmed temperature or in case of air over temperature. Digital quality instruments with double window for reading set up temperature and real temperature.

A 14

PVC PLASTIC ROOF

This option refers to a heavy-duty PVC plastic roof that protects the grains inside the cylinder from weather events. The roof has a hot galvanized steel frame and is delivered in parts to be assembled. The roof can be combined with the dust aspiration system for increasing the cleaning effect and for reducing environmental dust emissions.

A 16

PLENUM CHAMBER SPECIAL PLATES

These plates are mounted at the bottom of the plenum chamber for isolating the hot air from the grains in the conical part of the dryer. These plates are mandatory for drying grains with low specific weight (lower than 0.65g/cm3), lamellar grains or not perfectly clean grains. They are generally recommended for reducing fire risk and for giving a more homogeneous drying effect.

A 25

DUST ASPIRATION SYSTEM

This item is aimed to reduce dust emissions in atmosphere and to increase the cleaning of the

grain. The central tube is connected to an electrical fan (1,5kW) that sucks the dust from the recirculation of the grain on top of the central tube conveying it to the ground. The equipment includes connection pipes (plastic and hot galvanized steel) from the suction cap to the ground, the fan, a flow control valve, and electrical controls. If added to the roof the vacuum cleaning effect is increased. Note that when the dryer is delivered with this option, the top tube is slightly longer compared to a dryer without dust aspirator. This price refers to including this option at the moment of ordering a new dryer.

A 26

STANDARD CYCLONE

A cyclone can be mounted at the bottom of the dust aspiration system for dividing small dust particles coming from the dryer.

A 43

PORTABLE MOISTURE METER FOR GRAINS AND SEEDS

For whole grains and seeds. Moisture measurement range: grains and seeds 8…35%; oil seeds 5-25%. Contains 16 preprogrammed grains especially chosen for your countries most popular types. Large numeric display, temperature compensation system, Strong aluminum construction, delivered with protective case, carrying strap, grain measure cap, and battery

A 44

SPARE PARTS EMERGENCY KIT BASIC

Set of spare parts that can be good to have available in case of sudden stop of operations and it is not easy to retrieve in the short time. The set includes:

  • Diesel pump for RIELLO diesel burner
  •  RIELLO diesel burner control unit
  • RIELLO burner photocell
  • Temperature probe
  • GEFRAN 1300 thermostat
  • Air pressure switch

TOTAL

EXHIBIT B-Lot 2: FLOUR AND GRAIN PACKING MACHINE

Marks and No.

Equipment:  Flour  and   grain                    packing machine

QTY

U.P

TOTAL

M/N

TECHNICAL PARAMETERS

 

Model: DCS-50FB2

Weigh Range(kg): 1-50

Division value(g): 2 Weighing error: 0.1%F. S

 Material: Food grade stainless

Weighing speed(bag/h) <1000bags Working environment (power supply):

Relative humidity (RH) ≤ 90%, 4N-AC380V 50Hz,

Power consumption &Air consumption: 1.1KW,  0.4-0.5Mpa  compressed  air  1m3/h Dimension(mm) 3076*953*2690

Total

 EXHIBIT C- Lot 3:2 Automatic dosifier Machines

Description

Details

QTY

U.P

TOTAL

Type

Fully automatic, gravimetric/volumetric

2

Material

Food-grade stainless & plastic

Dimension

L86cm, W55cm, H40cm

Empty weight

26kg

Input Voltage

90 – 265 VAC

Output Voltage

24 VDC

Power Consumption

100W

Motor Holding Torque

5.2N-m

Grain Hopper Capacity

50kg

Premix Hopper Capacity

5kg

Max Feed Rate

2.5kg/hour of Premix

Min Feed Rate

N/A

Accuracy

+/- 10%

Additional Features

1.      LED Weight Display

2.      Data Storage

3.      Adjustable Pitch for Installation

4.      Adjustable Grain Flow Rate

5.      Programmable Dose Threshold

6.      Detachable Grain Shield

7.      Both gravimetric and volumetric modes

Total

 Note : The total cost must include all other  involved costs to deliver the equipment to the destination point ( taxes transport cost , road insurance…..)

 Additional Notes:

………………………………………………………………………………………………………

………………………………………………………………………………………………………..

Done at Kigali,09th March 2021

Diane NDAGIJIIMANA

MANAGING Director





CLICK HERE TO JOIN MUCURUZI.COM WHATSAPP BUSINESS GROUP





Kindly Note

All Jobs and Opportunities Published on mucuruzi.com are completely free to apply. A candidate should never pay any fee during the recruitment Process. Even if mucuruzi.com does its best to avoid any scam job or opportunity offer, a job seeker or an opportunity seeker is 100% responsible of applying at his own risk.
Check well before applying, if you doubt about the eligibility of any offer do not apply and notifie to mucuruzi.com via this email: mucuruzi2016@gmail.com and remember to never pay any fee to have a job or get any opportunity, if you do so, do it at your own risk.








WELCOME TO OUR WHATSAPP GROUP

Related posts

Leave a Reply